EECS 203 Mailing List
Re: Inverters

Re: Inverters

From: Jeremy Meisel <j-meisel_at_avoiding.spam>
Date: Mon Apr 14 2008 - 22:01:38 CDT
('binary' encoding is not supported, stored as-is) If I got what you are saying, I was able to do mine by having three wires from the encoder to the
inverter which resulted in a total of six wires to my decoder. Hope that answers your question.


==============Original message text===============
On Mon, 14 Apr 2008 9:58:08 pm CDT "Walter Han" wrote:

When the lab handout says "only 3 signal wires may connect the encoder to
the decoder," does this mean that only 3 wires can connect from the encoder
directly to the inverter directly to the decoder, or that the encoder can
connect to both the inverter AND decoder, and the outputs of the inverter
connect to the decoder as well? I don't know if I worded that in a manner
that is easy to understand..
===========End of original message text===========
Received on Mon Apr 14 22:01:38 2008

This archive was generated by hypermail 2.1.8 : Sat Aug 23 2008 - 21:08:11 CDT